PDX97229 Posted April 1, 2018 Report Share Posted April 1, 2018 Hello ALL: We have a 2016 MKX with about every option. Most works OK but we have been getting a warning going off like an object in the way, but nothing is anywhere near. This can not be demonstrated to a dealer as it is so intermittent. Sometimes it is even in a parking lot and other times when we are stopped at a light, it goes off when there is nothing ANYWHERE even near us. We hate to ignore it and we have even gotten out of the car and looked when in a parking lot and there is NOTHING there. Is there a sensitivity adjustment or has anyone else had this happen? Is there any fix? Thank you all for any help. Quote Link to comment Share on other sites More sharing options...
thisguy159 Posted April 1, 2018 Report Share Posted April 1, 2018 Ghosts....there is an a adjustment in the instrument cluster but what you described is not normal operation no matter what setting. Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted April 1, 2018 Report Share Posted April 1, 2018 My guess would suspect either a corroded connection on one if the sensors or (more likely) one one the sensors is getting water in it and faulting. Dr out it's fine. The first is to pull the four plugs one at a time and look for corrosion. Spray with contact cleaner, smear with dielectric greas and reconnect. The second should leave a code. Quote Link to comment Share on other sites More sharing options...
akirby Posted April 1, 2018 Report Share Posted April 1, 2018 This is common on 2nd gen Edge and MKX. The sensors are too sensitive, usually on the right side. Have not seen any adjustments or TSBs. VisionPilot and Timmer 2 Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted April 1, 2018 Report Share Posted April 1, 2018 I've read in other forums where bugs and dirt was causing sensitivity issues. OP wrote he had to keep them clean. Another forum OP wrote he had intermittent triggering and traced it to one sensor getting too hot when in sun. He isolated which one by pouring cold water on each sensor until he found the culprit. Dealer replaced and all's well. Timmer 1 Quote Link to comment Share on other sites More sharing options...
PDX97229 Posted April 1, 2018 Author Report Share Posted April 1, 2018 Well, what sensors should we look at. Four were mentioned, but where are they as there are many. Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted April 2, 2018 Report Share Posted April 2, 2018 I would check for codes first. Otherwise it becomes an exercise in isolation. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.