Jump to content

Enigine light low oil pressure


Bob7653

Recommended Posts

Pull your oil stick and look at the oil level. If the oil is creamish colored, theres water in the oil. If it looks like normal oil, there no water in the oil.

 

If its creamy, then yes, you have coolant in the oil. Need to get it fixed ASAP to protect the bearings. Have it towed if necessary.

 

Even so, it's possible that it's a blown head gasket, but failed water pump is much more common.

 

If the oil on the dip stick looks ok, look at the water pump weap hole on the top of the engine. A water pump can fail internally (coolant in oil) or externally, seals fail and leaks externally. If there's coolant there, the water pump's inner o- ring is blown. There are two seals, when the inner seal fails, coolant leaks and is designed to leak out of the weap hole. (No coolant leaks if the outer seal fails. It's there to direct coolant leaking from the inner seal to the weap hole).

 

If your unfamiliar with the weap hole, check out this thread: 

 

https://www.fordedgeforum.com/topic/26715-water-pump-weep-hole/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...